181101 and 040801: A/LE02/LE02.HTM

For this page, see LE02 in English or LG02 in German.
For the previous page, see LE01 in English or LG01 in German.
For the next page, see LE03 in English or LG03 in German.
Back to the main page of this colour series, see ../LE in English or ../LG in German.

BAM-test chart no. LE02 for printer output
16 steps: Chromatic to White and Black; Greys
1 page with 16x14 colours and 14 CIE-test colours

Measurement and CIELAB linearization: Colour Workflow (CW) by the input operator no. 5 (LAB*(ORS18) setcolor) and
different output PS operators and without or with MTL code for Output Linearisation (OL)


Fig. LN1: Output layout of all the L...NP files with the format A5 landscape in the following tables no. 1 to 3, see L02E00N1.PS / TXT / JPG / PDF


Fig. LF1: Output layout of all the L...FP files with the format A5 landscape in the following table no. 1, see L02E00F1.PS / TXT / JPG / PDF


Fig. SF1: Output layout of all the S...FP files with the format A5 landscape, see S02E00F1.PS / TXT / JPG / PDF

The output of the S...FP files is darker compared to the output of the L...FP files. For all the files S...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see LE02S in english or LG02S in german


Fig. QF1: Output layout of all the Q...FP files with the format A5 landscape, see Q02E00F1.PS / TXT / JPG / PDF

The output of the Q...FP files is darker compared to the output of the L...FP files. For all the files Q...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see LE02Q in english or LG02Q in german

Remark 1: The files* of Tables 1 to 3 may produce more than the three different page layouts shown in Fig. LN1 to Fig. LN3

Remark 2: The files* of Tables 1 to 3 produce the format A4 landscape.

Remark 3: The files* of Tables 1 to 3 include the linearising data for the device L = S and Q for the linearized output on this device L. The output of the FP file for the devices S and Q is darker and lighter compared to the output of the device L.

Input PS operator no. 5 (LAB*(ORS18) setcolor)
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte

Output
PS operator
parameter
i*ptrsc

Colorimetric transfer from the
input PS operator no. 5 (LAB*(ORS18) setcolor)
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L02E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L02E00FP.PS / TXT / PDF L02E00FP.DAT
L02E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L02E01FP.PS / TXT / PDF L02E01FP.DAT
L02E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L02E02FP.PS / TXT / PDF L02E02FP.DAT
L02E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L02E03FP.PS / TXT / PDF L02E03FP.DAT
L02E04NP.PS / TXT / PDF   4 lab* setcolor L02E04FP.PS / TXT / PDF L02E04FP.DAT
L02E05NP.PS / TXT / PDF  5 LAB* setcolor L02E05FP.PS / TXT / PDF L02E05FP.DAT
L02E06NP.PS / TXT / PDF  6 000n* setcmykcolor L02E06FP.PS / TXT / PDF L02E06FP.DAT
L02E07NP.PS / TXT / PDF  7 w* setgray L02E07FP.PS / TXT / PDF L02E07FP.DAT

Table 1: Files for the PDF start and linearised output with linearising data of the device L in the File (F); Input PS operator no. 5 (LAB*(ORS18) setcolor) in the NP file and output PS operators no. 0 to 7 in the FP file which are transferred by the PS MTL code.

Remark: The files* of Table 1 serve for a PDF output with linearisation data in the File (F) and not for a PS output.
* Files: L..0x, (S,Q,F,O,T)..00(NP,FP,NA,FA,SP).

Input PS operator no. 5 (LAB*(ORS18) setcolor)
and start files
*NA.PS / .TXT
140 / 140 kByte

Output
PS operator
parameter
i*ptrsc

Colorimetric transfer from the
input PS operator no. 5 (LAB*(ORS18) setcolor)
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L02E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor L02E00FA.PS / TXT L02E00FA.DAT
L02E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray L02E01FA.PS / TXT L02E01FA.DAT
L02E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor L02E02FA.PS / TXT L02E02FA.DAT
L02E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor L02E03FA.PS / TXT L02E03FA.DAT
L02E04NA.PS / TXT   4 lab* setcolor L02E04FA.PS / TXT L02E04FA.DAT
L02E05NA.PS / TXT  5 LAB* setcolor L02E05FA.PS / TXT L02E05FA.DAT
L02E06NA.PS / TXT  6 000n* setcmykcolor L02E06FA.PS / TXT L02E06FA.DAT
L02E07NA.PS / TXT  7 w* setgray L02E07FA.PS / TXT L02E07FA.DAT

Table 2: Files for the PS start and linearised output with linearising data of the device L in the File (F); Input PS operator no. 5 (LAB*(ORS18) setcolor) in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: The files* of Table 2 serve for a PS output and not for a PDF output.

Input PS operator no. 5 (LAB*(ORS18) setcolor)
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte

Output
PS operator
parameter
i*ptrsc

Colorimetric transfer from the
input PS operator no. 5 (LAB*(ORS18) setcolor)
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with Startup (S)
without device CIELAB data
of device L
in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code for Startup (S)
with device CIELAB data
of device L
100 kByte
L02E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L02E00SP.PS / TXT / PDF *) L02E00SP.DAT
L02E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L02E01SP.PS / TXT / PDF L02E01SP.DAT
L02E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L02E02SP.PS / TXT / PDF L02E02SP.DAT
L02E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L02E03SP.PS / TXT / PDF L02E03SP.DAT
L02E04NP.PS / TXT / PDF   4 lab* setcolor L02E04SP.PS / TXT / PDF L02E04SP.DAT
L02E05NP.PS / TXT / PDF  5 LAB* setcolor L02E05SP.PS / TXT / PDF L02E05SP.DAT
L02E06NP.PS / TXT / PDF  6 000n* setcmykcolor L02E06SP.PS / TXT / PDF L02E06SP.DAT
L02E07NP.PS / TXT / PDF  7 w* setgray L02E07SP.PS / TXT / PDF L02E07SP.DAT

Table 3: Files for a PDF start and linearised output with linearising data of the device L in the Startup (S); Input PS operator no. 5 (LAB*(ORS18) setcolor) in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

Remark: The files* of Table 3 serve for a PDF output with linearisation data L02E0xSP.DAT (x=0..7) in the Distiller Startup (S) directory and not for a PS output.

*) Please transfer e. g. the PDF file L02E00SP.PS with the file L02E00SP.DAT in the Distiller Startup (S) Directory, which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output as the file L02E00FP.PDF of the Table 2. All the files L02E0xSP.PS (x=0,7) of the Table 3 are distilled with only the default file Example.ps in the Distiller Startup (S) Directory.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder LE02, see
../LE.HTM in English or ../LG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.