181212 and 030101: A/KE88/KE88A.HTM

For this page, see KE88 in English or KG88 in German.
For the previous page, see KE87 in English or KG87 in German.
For the next page, see KE89 in English or KG89 in German.
Back to the main page of this colour series, see ../KE in English or ../KG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see KE88A in English and KG88A in German
Yr=2.52 (standard), see KE88B in English and KG88B in German
Yr=5.04, see KE88C in English and KG88C in German
Yr=7.56, see KE88D in English and KG88D in German

Achromatic ISO/IEC-test chart 3, nnn0* input
Colour Workflow (CW) by the input operator no. 2
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
A88E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
A88E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A88E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E00FP.PS / TXT / PDF A88E00FP.DAT
A88E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A88E01FP.PS / TXT / PDF A88E01FP.DAT
A88E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E02FP.PS / TXT / PDF A88E02FP.DAT
A88E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A88E03FP.PS / TXT / PDF A88E03FP.DAT
A88E04NP.PS / TXT / PDF   4 lab* setcolor A88E04FP.PS / TXT / PDF A88E04FP.DAT
A88E05NP.PS / TXT / PDF  5 LAB* setcolor A88E05FP.PS / TXT / PDF A88E05FP.DAT
A88E06NP.PS / TXT / PDF  6 000n* setcmykcolor A88E06FP.PS / TXT / PDF A88E06FP.DAT
A88E07NP.PS / TXT / PDF  7 w* setgray A88E07FP.PS / TXT / PDF A88E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 2
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A88E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E00FA.PS / TXT A88E00FA.DAT
A88E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray A88E01FA.PS / TXT A88E01FA.DAT
A88E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E02FA.PS / TXT A88E02FA.DAT
A88E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A88E03FA.PS / TXT A88E03FA.DAT
A88E04NA.PS / TXT   4 lab* setcolor A88E04FA.PS / TXT A88E04FA.DAT
A88E05NA.PS / TXT  5 LAB* setcolor A88E05FA.PS / TXT A88E05FA.DAT
A88E06NA.PS / TXT  6 000n* setcmykcolor A88E06FA.PS / TXT A88E06FA.DAT
A88E07NA.PS / TXT  7 w* setgray A88E07FA.PS / TXT A88E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 2 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A88E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E00SP.PS / TXT / PDF A88E00SP.DAT
A88E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A88E01SP.PS / TXT / PDF A88E01SP.DAT
A88E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E02SP.PS / TXT / PDF A88E02SP.DAT
A88E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A88E03SP.PS / TXT / PDF *) A88E03SP.DAT
A88E04NP.PS / TXT / PDF   4 lab* setcolor A88E04SP.PS / TXT / PDF A88E04SP.DAT
A88E05NP.PS / TXT / PDF  5 LAB* setcolor A88E05SP.PS / TXT / PDF A88E05SP.DAT
A88E06NP.PS / TXT / PDF  6 000n* setcmykcolor A88E06SP.PS / TXT / PDF A88E06SP.DAT
A88E07NP.PS / TXT / PDF  7 w* setgray A88E07SP.PS / TXT / PDF A88E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A88E00SP.PS with the file A88E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A88E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A88E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E10FP.PS / TXT / PDF A88E10FP.DAT
A88E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A88E11FP.PS / TXT / PDF A88E11FP.DAT
A88E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E12FP.PS / TXT / PDF A88E12FP.DAT
A88E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A88E13FP.PS / TXT / PDF A88E13FP.DAT
A88E14NP.PS / TXT / PDF   4 lab* setcolor A88E14FP.PS / TXT / PDF A88E14FP.DAT
A88E15NP.PS / TXT / PDF  5 LAB* setcolor A88E15FP.PS / TXT / PDF A88E15FP.DAT
A88E16NP.PS / TXT / PDF  6 000n* setcmykcolor A88E16FP.PS / TXT / PDF A88E16FP.DAT
A88E17NP.PS / TXT / PDF  7 w* setgray A88E17FP.PS / TXT / PDF A88E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 2
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A88E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E10FA.PS / TXT A88E10FA.DAT
A88E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray A88E11FA.PS / TXT A88E11FA.DAT
A88E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E12FA.PS / TXT A88E12FA.DAT
A88E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A88E13FA.PS / TXT A88E13FA.DAT
A88E14NA.PS / TXT   4 lab* setcolor A88E14FA.PS / TXT A88E14FA.DAT
A88E15NA.PS / TXT  5 LAB* setcolor A88E15FA.PS / TXT A88E15FA.DAT
A88E16NA.PS / TXT  6 000n* setcmykcolor A88E16FA.PS / TXT A88E16FA.DAT
A88E17NA.PS / TXT  7 w* setgray A88E17FA.PS / TXT A88E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 2 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A88E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A88E10SP.PS / TXT / PDF A88E10SP.DAT
A88E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A88E11SP.PS / TXT / PDF A88E11SP.DAT
A88E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A88E12SP.PS / TXT / PDF A88E12SP.DAT
A88E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A88E13SP.PS / TXT / PDF *) A88E13SP.DAT
A88E14NP.PS / TXT / PDF   4 lab* setcolor A88E14SP.PS / TXT / PDF A88E14SP.DAT
A88E15NP.PS / TXT / PDF  5 LAB* setcolor A88E15SP.PS / TXT / PDF A88E15SP.DAT
A88E16NP.PS / TXT / PDF  6 000n* setcmykcolor A88E16SP.PS / TXT / PDF A88E16SP.DAT
A88E17NP.PS / TXT / PDF  7 w* setgray A88E17SP.PS / TXT / PDF A88E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A88E10SP.PS with the file A88E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A88E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder KE88, see
../KE.HTM in English or ../KG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.