181212 and 030101: A/FE86/FE86Q.HTM

For this page, see FE86 in English or FG86 in German.
For the previous page, see FE85 in English or FG85 in German.
For the next page, see FE87 in English or FG87 in German.
Back to the main page of this colour series, see ../FE in English or ../FG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see FE86L in English and FG86L in German,
S=Square root, see FE86S in English and FG86S in German,
Q=Quadratic, see FE86Q in English and FG86Q in German,
printer F, see FE86F in English and FG86F in German,
printer O, see FE86O in English and FG86O in German,
printer T, see FE86T in English and FG86T in German.

Achromatic ISO/IEC-test chart 3, 000n* input
Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
Q86E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
Q86E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E00FP.PS / TXT / PDF Q86E00FP.DAT
Q86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q86E01FP.PS / TXT / PDF Q86E01FP.DAT
Q86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E02FP.PS / TXT / PDF Q86E02FP.DAT
Q86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q86E03FP.PS / TXT / PDF Q86E03FP.DAT
Q86E04NP.PS / TXT / PDF   4 lab* setcolor Q86E04FP.PS / TXT / PDF Q86E04FP.DAT
Q86E05NP.PS / TXT / PDF  5 LAB* setcolor Q86E05FP.PS / TXT / PDF Q86E05FP.DAT
Q86E06NP.PS / TXT / PDF  6 000n* setcmykcolor Q86E06FP.PS / TXT / PDF Q86E06FP.DAT
Q86E07NP.PS / TXT / PDF  7 w* setgray Q86E07FP.PS / TXT / PDF Q86E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
Q86E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E00FA.PS / TXT Q86E00FA.DAT
Q86E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray Q86E01FA.PS / TXT Q86E01FA.DAT
Q86E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E02FA.PS / TXT Q86E02FA.DAT
Q86E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor Q86E03FA.PS / TXT Q86E03FA.DAT
Q86E04NA.PS / TXT   4 lab* setcolor Q86E04FA.PS / TXT Q86E04FA.DAT
Q86E05NA.PS / TXT  5 LAB* setcolor Q86E05FA.PS / TXT Q86E05FA.DAT
Q86E06NA.PS / TXT  6 000n* setcmykcolor Q86E06FA.PS / TXT Q86E06FA.DAT
Q86E07NA.PS / TXT  7 w* setgray Q86E07FA.PS / TXT Q86E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E00SP.PS / TXT / PDF Q86E00SP.DAT
Q86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q86E01SP.PS / TXT / PDF Q86E01SP.DAT
Q86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E02SP.PS / TXT / PDF Q86E02SP.DAT
Q86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q86E03SP.PS / TXT / PDF *) Q86E03SP.DAT
Q86E04NP.PS / TXT / PDF   4 lab* setcolor Q86E04SP.PS / TXT / PDF Q86E04SP.DAT
Q86E05NP.PS / TXT / PDF  5 LAB* setcolor Q86E05SP.PS / TXT / PDF Q86E05SP.DAT
Q86E06NP.PS / TXT / PDF  6 000n* setcmykcolor Q86E06SP.PS / TXT / PDF Q86E06SP.DAT
Q86E07NP.PS / TXT / PDF  7 w* setgray Q86E07SP.PS / TXT / PDF Q86E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file Q86E03SP.PS with the file Q86E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file Q86E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E10FP.PS / TXT / PDF Q86E10FP.DAT
Q86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q86E11FP.PS / TXT / PDF Q86E11FP.DAT
Q86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E12FP.PS / TXT / PDF Q86E12FP.DAT
Q86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q86E13FP.PS / TXT / PDF Q86E13FP.DAT
Q86E14NP.PS / TXT / PDF   4 lab* setcolor Q86E14FP.PS / TXT / PDF Q86E14FP.DAT
Q86E15NP.PS / TXT / PDF  5 LAB* setcolor Q86E15FP.PS / TXT / PDF Q86E15FP.DAT
Q86E16NP.PS / TXT / PDF  6 000n* setcmykcolor Q86E16FP.PS / TXT / PDF Q86E16FP.DAT
Q86E17NP.PS / TXT / PDF  7 w* setgray Q86E17FP.PS / TXT / PDF Q86E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
Q86E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E10FA.PS / TXT Q86E10FA.DAT
Q86E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray Q86E11FA.PS / TXT Q86E11FA.DAT
Q86E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E12FA.PS / TXT Q86E12FA.DAT
Q86E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor Q86E13FA.PS / TXT Q86E13FA.DAT
Q86E14NA.PS / TXT   4 lab* setcolor Q86E14FA.PS / TXT Q86E14FA.DAT
Q86E15NA.PS / TXT  5 LAB* setcolor Q86E15FA.PS / TXT Q86E15FA.DAT
Q86E16NA.PS / TXT  6 000n* setcmykcolor Q86E16FA.PS / TXT Q86E16FA.DAT
Q86E17NA.PS / TXT  7 w* setgray Q86E17FA.PS / TXT Q86E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q86E10SP.PS / TXT / PDF Q86E10SP.DAT
Q86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q86E11SP.PS / TXT / PDF Q86E11SP.DAT
Q86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q86E12SP.PS / TXT / PDF Q86E12SP.DAT
Q86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q86E13SP.PS / TXT / PDF *) Q86E13SP.DAT
Q86E14NP.PS / TXT / PDF   4 lab* setcolor Q86E14SP.PS / TXT / PDF Q86E14SP.DAT
Q86E15NP.PS / TXT / PDF  5 LAB* setcolor Q86E15SP.PS / TXT / PDF Q86E15SP.DAT
Q86E16NP.PS / TXT / PDF  6 000n* setcmykcolor Q86E16SP.PS / TXT / PDF Q86E16SP.DAT
Q86E17NP.PS / TXT / PDF  7 w* setgray Q86E17SP.PS / TXT / PDF Q86E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file Q86E13SP.PS with the file Q86E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file Q86E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder FE86, see
../FE.HTM in English or ../FG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.