181212 and 030101: A/EE89/EE89Q.HTM

For this page, see EE89 in English or EG89 in German.
For the previous page, see EE88 in English or EG88 in German.
For the next page, see EE90 in English or EG90 in German.
Back to the main page of this colour series, see ../EE in English or ../EG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see EE89L in English and EG89L in German,
S=Square root, see EE89S in English and EG89S in German,
Q=Quadratic, see EE89Q in English and EG89Q in German,
printer F, see EE89F in English and EG89F in German,
printer O, see EE89O in English and EG89O in German,
printer T, see EE89T in English and EG89T in German.

Achromatic ISO/IEC-test chart 3, www* input
Colour Workflow (CW) by the input operator no. 3
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
Q89E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
Q89E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E00FP.PS / TXT / PDF Q89E00FP.DAT
Q89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q89E01FP.PS / TXT / PDF Q89E01FP.DAT
Q89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E02FP.PS / TXT / PDF Q89E02FP.DAT
Q89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q89E03FP.PS / TXT / PDF Q89E03FP.DAT
Q89E04NP.PS / TXT / PDF   4 lab* setcolor Q89E04FP.PS / TXT / PDF Q89E04FP.DAT
Q89E05NP.PS / TXT / PDF  5 LAB* setcolor Q89E05FP.PS / TXT / PDF Q89E05FP.DAT
Q89E06NP.PS / TXT / PDF  6 000n* setcmykcolor Q89E06FP.PS / TXT / PDF Q89E06FP.DAT
Q89E07NP.PS / TXT / PDF  7 w* setgray Q89E07FP.PS / TXT / PDF Q89E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
Q89E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E00FA.PS / TXT Q89E00FA.DAT
Q89E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray Q89E01FA.PS / TXT Q89E01FA.DAT
Q89E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E02FA.PS / TXT Q89E02FA.DAT
Q89E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor Q89E03FA.PS / TXT Q89E03FA.DAT
Q89E04NA.PS / TXT   4 lab* setcolor Q89E04FA.PS / TXT Q89E04FA.DAT
Q89E05NA.PS / TXT  5 LAB* setcolor Q89E05FA.PS / TXT Q89E05FA.DAT
Q89E06NA.PS / TXT  6 000n* setcmykcolor Q89E06FA.PS / TXT Q89E06FA.DAT
Q89E07NA.PS / TXT  7 w* setgray Q89E07FA.PS / TXT Q89E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E00SP.PS / TXT / PDF Q89E00SP.DAT
Q89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q89E01SP.PS / TXT / PDF Q89E01SP.DAT
Q89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E02SP.PS / TXT / PDF Q89E02SP.DAT
Q89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q89E03SP.PS / TXT / PDF *) Q89E03SP.DAT
Q89E04NP.PS / TXT / PDF   4 lab* setcolor Q89E04SP.PS / TXT / PDF Q89E04SP.DAT
Q89E05NP.PS / TXT / PDF  5 LAB* setcolor Q89E05SP.PS / TXT / PDF Q89E05SP.DAT
Q89E06NP.PS / TXT / PDF  6 000n* setcmykcolor Q89E06SP.PS / TXT / PDF Q89E06SP.DAT
Q89E07NP.PS / TXT / PDF  7 w* setgray Q89E07SP.PS / TXT / PDF Q89E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file Q89E03SP.PS with the file Q89E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file Q89E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E10FP.PS / TXT / PDF Q89E10FP.DAT
Q89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q89E11FP.PS / TXT / PDF Q89E11FP.DAT
Q89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E12FP.PS / TXT / PDF Q89E12FP.DAT
Q89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q89E13FP.PS / TXT / PDF Q89E13FP.DAT
Q89E14NP.PS / TXT / PDF   4 lab* setcolor Q89E14FP.PS / TXT / PDF Q89E14FP.DAT
Q89E15NP.PS / TXT / PDF  5 LAB* setcolor Q89E15FP.PS / TXT / PDF Q89E15FP.DAT
Q89E16NP.PS / TXT / PDF  6 000n* setcmykcolor Q89E16FP.PS / TXT / PDF Q89E16FP.DAT
Q89E17NP.PS / TXT / PDF  7 w* setgray Q89E17FP.PS / TXT / PDF Q89E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
Q89E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E10FA.PS / TXT Q89E10FA.DAT
Q89E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray Q89E11FA.PS / TXT Q89E11FA.DAT
Q89E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E12FA.PS / TXT Q89E12FA.DAT
Q89E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor Q89E13FA.PS / TXT Q89E13FA.DAT
Q89E14NA.PS / TXT   4 lab* setcolor Q89E14FA.PS / TXT Q89E14FA.DAT
Q89E15NA.PS / TXT  5 LAB* setcolor Q89E15FA.PS / TXT Q89E15FA.DAT
Q89E16NA.PS / TXT  6 000n* setcmykcolor Q89E16FA.PS / TXT Q89E16FA.DAT
Q89E17NA.PS / TXT  7 w* setgray Q89E17FA.PS / TXT Q89E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
Q89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor Q89E10SP.PS / TXT / PDF Q89E10SP.DAT
Q89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray Q89E11SP.PS / TXT / PDF Q89E11SP.DAT
Q89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor Q89E12SP.PS / TXT / PDF Q89E12SP.DAT
Q89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor Q89E13SP.PS / TXT / PDF *) Q89E13SP.DAT
Q89E14NP.PS / TXT / PDF   4 lab* setcolor Q89E14SP.PS / TXT / PDF Q89E14SP.DAT
Q89E15NP.PS / TXT / PDF  5 LAB* setcolor Q89E15SP.PS / TXT / PDF Q89E15SP.DAT
Q89E16NP.PS / TXT / PDF  6 000n* setcmykcolor Q89E16SP.PS / TXT / PDF Q89E16SP.DAT
Q89E17NP.PS / TXT / PDF  7 w* setgray Q89E17SP.PS / TXT / PDF Q89E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file Q89E13SP.PS with the file Q89E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file Q89E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder EE89, see
../EE.HTM in English or ../EG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.