181212 and 030101: A/EE86/EE86F.HTM

For this page, see EE86 in English or EG86 in German.
For the previous page, see EE85 in English or EG85 in German.
For the next page, see EE87 in English or EG87 in German.
Back to the main page of this colour series, see ../EE in English or ../EG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see EE86L in English and EG86L in German,
S=Square root, see EE86S in English and EG86S in German,
Q=Quadratic, see EE86Q in English and EG86Q in German,
printer F, see EE86F in English and EG86F in German,
printer O, see EE86O in English and EG86O in German,
printer T, see EE86T in English and EG86T in German.

Achromatic ISO/IEC-test chart 3, 000n* input
Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
F86E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
F86E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E00FP.PS / TXT / PDF F86E00FP.DAT
F86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F86E01FP.PS / TXT / PDF F86E01FP.DAT
F86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E02FP.PS / TXT / PDF F86E02FP.DAT
F86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F86E03FP.PS / TXT / PDF F86E03FP.DAT
F86E04NP.PS / TXT / PDF   4 lab* setcolor F86E04FP.PS / TXT / PDF F86E04FP.DAT
F86E05NP.PS / TXT / PDF  5 LAB* setcolor F86E05FP.PS / TXT / PDF F86E05FP.DAT
F86E06NP.PS / TXT / PDF  6 000n* setcmykcolor F86E06FP.PS / TXT / PDF F86E06FP.DAT
F86E07NP.PS / TXT / PDF  7 w* setgray F86E07FP.PS / TXT / PDF F86E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F86E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E00FA.PS / TXT F86E00FA.DAT
F86E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray F86E01FA.PS / TXT F86E01FA.DAT
F86E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E02FA.PS / TXT F86E02FA.DAT
F86E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F86E03FA.PS / TXT F86E03FA.DAT
F86E04NA.PS / TXT   4 lab* setcolor F86E04FA.PS / TXT F86E04FA.DAT
F86E05NA.PS / TXT  5 LAB* setcolor F86E05FA.PS / TXT F86E05FA.DAT
F86E06NA.PS / TXT  6 000n* setcmykcolor F86E06FA.PS / TXT F86E06FA.DAT
F86E07NA.PS / TXT  7 w* setgray F86E07FA.PS / TXT F86E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E00SP.PS / TXT / PDF F86E00SP.DAT
F86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F86E01SP.PS / TXT / PDF F86E01SP.DAT
F86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E02SP.PS / TXT / PDF F86E02SP.DAT
F86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F86E03SP.PS / TXT / PDF *) F86E03SP.DAT
F86E04NP.PS / TXT / PDF   4 lab* setcolor F86E04SP.PS / TXT / PDF F86E04SP.DAT
F86E05NP.PS / TXT / PDF  5 LAB* setcolor F86E05SP.PS / TXT / PDF F86E05SP.DAT
F86E06NP.PS / TXT / PDF  6 000n* setcmykcolor F86E06SP.PS / TXT / PDF F86E06SP.DAT
F86E07NP.PS / TXT / PDF  7 w* setgray F86E07SP.PS / TXT / PDF F86E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F86E03SP.PS with the file F86E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F86E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E10FP.PS / TXT / PDF F86E10FP.DAT
F86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F86E11FP.PS / TXT / PDF F86E11FP.DAT
F86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E12FP.PS / TXT / PDF F86E12FP.DAT
F86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F86E13FP.PS / TXT / PDF F86E13FP.DAT
F86E14NP.PS / TXT / PDF   4 lab* setcolor F86E14FP.PS / TXT / PDF F86E14FP.DAT
F86E15NP.PS / TXT / PDF  5 LAB* setcolor F86E15FP.PS / TXT / PDF F86E15FP.DAT
F86E16NP.PS / TXT / PDF  6 000n* setcmykcolor F86E16FP.PS / TXT / PDF F86E16FP.DAT
F86E17NP.PS / TXT / PDF  7 w* setgray F86E17FP.PS / TXT / PDF F86E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F86E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E10FA.PS / TXT F86E10FA.DAT
F86E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray F86E11FA.PS / TXT F86E11FA.DAT
F86E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E12FA.PS / TXT F86E12FA.DAT
F86E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F86E13FA.PS / TXT F86E13FA.DAT
F86E14NA.PS / TXT   4 lab* setcolor F86E14FA.PS / TXT F86E14FA.DAT
F86E15NA.PS / TXT  5 LAB* setcolor F86E15FA.PS / TXT F86E15FA.DAT
F86E16NA.PS / TXT  6 000n* setcmykcolor F86E16FA.PS / TXT F86E16FA.DAT
F86E17NA.PS / TXT  7 w* setgray F86E17FA.PS / TXT F86E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F86E10SP.PS / TXT / PDF F86E10SP.DAT
F86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F86E11SP.PS / TXT / PDF F86E11SP.DAT
F86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F86E12SP.PS / TXT / PDF F86E12SP.DAT
F86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F86E13SP.PS / TXT / PDF *) F86E13SP.DAT
F86E14NP.PS / TXT / PDF   4 lab* setcolor F86E14SP.PS / TXT / PDF F86E14SP.DAT
F86E15NP.PS / TXT / PDF  5 LAB* setcolor F86E15SP.PS / TXT / PDF F86E15SP.DAT
F86E16NP.PS / TXT / PDF  6 000n* setcmykcolor F86E16SP.PS / TXT / PDF F86E16SP.DAT
F86E17NP.PS / TXT / PDF  7 w* setgray F86E17SP.PS / TXT / PDF F86E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F86E13SP.PS with the file F86E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F86E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder EE86, see
../EE.HTM in English or ../EG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.