181212 and 030101: A/DE86/DE86T.HTM

For this page, see DE86 in English or DG86 in German.
For the previous page, see DE85 in English or DG85 in German.
For the next page, see DE87 in English or DG87 in German.
Back to the main page of this colour series, see ../DE in English or ../DG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see DE86L in English and DG86L in German,
S=Square root, see DE86S in English and DG86S in German,
Q=Quadratic, see DE86Q in English and DG86Q in German,
printer F, see DE86F in English and DG86F in German,
printer O, see DE86O in English and DG86O in German,
printer T, see DE86T in English and DG86T in German.

Achromatic ISO/IEC-test chart 3, 000n* input
Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
T86E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
T86E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
T86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E00FP.PS / TXT / PDF T86E00FP.DAT
T86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray T86E01FP.PS / TXT / PDF T86E01FP.DAT
T86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E02FP.PS / TXT / PDF T86E02FP.DAT
T86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor T86E03FP.PS / TXT / PDF T86E03FP.DAT
T86E04NP.PS / TXT / PDF   4 lab* setcolor T86E04FP.PS / TXT / PDF T86E04FP.DAT
T86E05NP.PS / TXT / PDF  5 LAB* setcolor T86E05FP.PS / TXT / PDF T86E05FP.DAT
T86E06NP.PS / TXT / PDF  6 000n* setcmykcolor T86E06FP.PS / TXT / PDF T86E06FP.DAT
T86E07NP.PS / TXT / PDF  7 w* setgray T86E07FP.PS / TXT / PDF T86E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
T86E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E00FA.PS / TXT T86E00FA.DAT
T86E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray T86E01FA.PS / TXT T86E01FA.DAT
T86E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E02FA.PS / TXT T86E02FA.DAT
T86E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor T86E03FA.PS / TXT T86E03FA.DAT
T86E04NA.PS / TXT   4 lab* setcolor T86E04FA.PS / TXT T86E04FA.DAT
T86E05NA.PS / TXT  5 LAB* setcolor T86E05FA.PS / TXT T86E05FA.DAT
T86E06NA.PS / TXT  6 000n* setcmykcolor T86E06FA.PS / TXT T86E06FA.DAT
T86E07NA.PS / TXT  7 w* setgray T86E07FA.PS / TXT T86E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
T86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E00SP.PS / TXT / PDF T86E00SP.DAT
T86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray T86E01SP.PS / TXT / PDF T86E01SP.DAT
T86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E02SP.PS / TXT / PDF T86E02SP.DAT
T86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor T86E03SP.PS / TXT / PDF *) T86E03SP.DAT
T86E04NP.PS / TXT / PDF   4 lab* setcolor T86E04SP.PS / TXT / PDF T86E04SP.DAT
T86E05NP.PS / TXT / PDF  5 LAB* setcolor T86E05SP.PS / TXT / PDF T86E05SP.DAT
T86E06NP.PS / TXT / PDF  6 000n* setcmykcolor T86E06SP.PS / TXT / PDF T86E06SP.DAT
T86E07NP.PS / TXT / PDF  7 w* setgray T86E07SP.PS / TXT / PDF T86E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file T86E03SP.PS with the file T86E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file T86E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
T86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E10FP.PS / TXT / PDF T86E10FP.DAT
T86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray T86E11FP.PS / TXT / PDF T86E11FP.DAT
T86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E12FP.PS / TXT / PDF T86E12FP.DAT
T86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor T86E13FP.PS / TXT / PDF T86E13FP.DAT
T86E14NP.PS / TXT / PDF   4 lab* setcolor T86E14FP.PS / TXT / PDF T86E14FP.DAT
T86E15NP.PS / TXT / PDF  5 LAB* setcolor T86E15FP.PS / TXT / PDF T86E15FP.DAT
T86E16NP.PS / TXT / PDF  6 000n* setcmykcolor T86E16FP.PS / TXT / PDF T86E16FP.DAT
T86E17NP.PS / TXT / PDF  7 w* setgray T86E17FP.PS / TXT / PDF T86E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
T86E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E10FA.PS / TXT T86E10FA.DAT
T86E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray T86E11FA.PS / TXT T86E11FA.DAT
T86E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E12FA.PS / TXT T86E12FA.DAT
T86E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor T86E13FA.PS / TXT T86E13FA.DAT
T86E14NA.PS / TXT   4 lab* setcolor T86E14FA.PS / TXT T86E14FA.DAT
T86E15NA.PS / TXT  5 LAB* setcolor T86E15FA.PS / TXT T86E15FA.DAT
T86E16NA.PS / TXT  6 000n* setcmykcolor T86E16FA.PS / TXT T86E16FA.DAT
T86E17NA.PS / TXT  7 w* setgray T86E17FA.PS / TXT T86E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
T86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor T86E10SP.PS / TXT / PDF T86E10SP.DAT
T86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray T86E11SP.PS / TXT / PDF T86E11SP.DAT
T86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor T86E12SP.PS / TXT / PDF T86E12SP.DAT
T86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor T86E13SP.PS / TXT / PDF *) T86E13SP.DAT
T86E14NP.PS / TXT / PDF   4 lab* setcolor T86E14SP.PS / TXT / PDF T86E14SP.DAT
T86E15NP.PS / TXT / PDF  5 LAB* setcolor T86E15SP.PS / TXT / PDF T86E15SP.DAT
T86E16NP.PS / TXT / PDF  6 000n* setcmykcolor T86E16SP.PS / TXT / PDF T86E16SP.DAT
T86E17NP.PS / TXT / PDF  7 w* setgray T86E17SP.PS / TXT / PDF T86E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file T86E13SP.PS with the file T86E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file T86E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder DE86, see
../DE.HTM in English or ../DG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.