030601: www.ps.bam.de/CE69/CE69L.HTM

BAM-test chart CE69 with XYZ linearization data
16 grey steps for ISO/CD 9241-306: Displays
TitleC

Colour Workflow (CW) by the input operator no. 0 to 3 (000n*, w*, nnn0*, www*) and
equal output PS operator and without or with MFL code for Output Linearisation (OL)

Any NP file produces 1 page for a maximum luminous contrast ratio of the (ideal) display without reflection of any room lighting. Any FP file (of Table 1 to 3) shows 8 gray series on 2 to 8 pages for 8 different contrast ratios which depend on the display reflection for white and black in the office.
The 16 steps and the Landolt-rings are recognized best only for one of the 8 gray series.
The PS file may be used for the correction of the initial display output either by 16 measured Y luminance reflectance data (see directories ..60 to 69) or 16 L* lightness data (see directories ..70 to ..78).

For this page without and with MTL code for OL with CIELAB data of surface colours,
for the device L=Linear, see CE69L in english or CG69L in german,
for the previous similar page, see CE68L in english or CG68L in german
for the next similar page, see CE70L in english or CG70L in german

The output of the S...FP files is darker compared to the output of the L...FP files. For all the files S...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE69S in english or CG69S in german

The output of the Q...FP files is lighter compared to the output of the L...FP files. For all the files Q...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE69Q in english or CG69Q in german


Fig. LN1: Output layout of all the L...NP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see
L69E00N1.PS / TXT / JPG / PDF


Fig. LF1: Output layout of all the L...FP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see
L69E00F1.PS / TXT / JPG / PDF


Fig. SF1: Output layout of all the S...FP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see
S69E00F1.PS / TXT / JPG / PDF


Fig. QF1: Output layout of all the Q...FP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see
Q69E00F1.PS / TXT / JPG / PDF

Remark 1: The files* of Tables 1 to 3 may produce more than one page layout shown in Fig. LN1

Remark 2: The files* of Tables 1 to 3 produce the format A4 landscape.

Remark 3: The files* of Tables 1 to 3 include the linearising data for the device L = S and Q for the linearized output on this device L. The output of the FP file for the devices S and Q is darker and lighter compared to the output of the device L.

Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 40 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FP.PS / TXT / PDF
240 / 240 / 140 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L69E00NP.PS / TXT / PDF =0,1,2, or 3   L69E00FP.PS / TXT / PDF L69E00FP.DAT
Table 1: Files for the PDF start and linearised output with linearising data of the device L in the File (F); Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) in the NP file and equal output PS operator in the FP file.

Remark: The files* of Table 1 serve for a PDF output with linearisation data in the File (F) and not for a PS output.
* All the files are on www.ps.bam.de.

Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
and start files

*NA.PS / .TXT
140 / 140 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L69E00NA.PS / TXT =0,1,2, or 3   L69E00FA.PS / TXT L69E00FA.DAT
Table 2: Files for the PS start and linearised output with linearising data of the device L in the File (F); Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) in the NA file and equal output PS operator in the FP file.

Remark: The files* of Table 2 serve for a PS output and not for a PDF output.

Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 40 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*)
defined by i*ptrsc

Output Linearisation with Startup (S)
without device CIELAB data
of device L
in files *SP.PS / TXT / PDF
240 / 240 / 140 kByte

PostScript MTL code for Startup (S)
with device CIELAB data
of device L
100 kByte
L69E00NP.PS / TXT / PDF =0,1,2, or 3   L69E00SP.PS / TXT / PDF *) L69E00SP.DAT
Table 3: Files for the PDF start and linearised output with linearising data of the device L in the Startup (S); Input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) in the NP file and equal output PS operator in the FP file.

*) Please transfer e. g. the PDF file L69E00SP.PS with the file L69E00SP.DAT in the Distiller Startup (S) Directory, which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output as the file L69E00FP.PDF of the Table 2. All the files L69E1xSP.PS (x=0,7) of the Table 3 are distilled with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: The files* of Table 3 serve for a PDF output with linearisation data L69E00SP.DAT in the Distiller Startup (S) directory and not for a PS output.

-------------------------------------------------------------------
For main information about DIN- and ISO/IEC-test charts for the test of image reproduction, yield and emission in english (E) or german (G)

ISO/IEC-test charts according to ISO/IEC TR 19797:2004 "Output Linearizing" see DE95 or DG95
ISO/IEC-test charts according to ISO/IEC DTR 24705:2004 "Image reproduction properties", see DE96 or DG96
ISO/IEC-test charts according to ISO/IEC 15775:1999 and DIS ISO/IEC 19839-1 to -4:2000 "Image reproduction properties", see IE13 or IG13
DIN-test charts according to DIN 33866-1 to -5:2000, "Image reproduction properties", see DE13 or DG13
DIN-test charts according to DIN 33870:2001, "Relative yield of achromatic toner printers", see DE02 or DG02
DIN-test charts according to DIN 33871-1:2003, "Relative yield of inkjet color printers", see 33871E or 33871
Proposal for ISO/IEC-test charts according to ISO/IEC/FCD 19752:2003 "Yield of achromatic toner printers", see 19752E or 19752
Proposal for ISO-test charts according to ISO/CD 9241-306:2004 "Visual Displays", see 9241E or 9241

Digital Asian ISO/IEC-test charts with english text:
www.jbmia.or.jp/~isoiec/sc28/testchart/index.htm


Overwiew for additional test charts:
According to ISO/IEC 15775:1999, ISO/IEC TR 19797:2004, ISO/IEC DTR 24705:2004, see DE or DG
Acording to DIN 33870:2001, DIN 33871-1:2002, ISO/IEC/FCD 19752:2003, see BE or BG
Acording to ISO/CD 9241-306:2004 "Visual Displays", see CE or CG
Acording to ISO/IEC TR 19797:2004 with additional blackish colour scales, see LE or LG


go to home page