181212 and 030101: A/DE88/DE88L.HTM

For this page, see DE88 in English or DG88 in German.
For the previous page, see DE87 in English or DG87 in German.
For the next page, see DE89 in English or DG89 in German.
Back to the main page of this colour series, see ../DE in English or ../DG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see DE88L in English and DG88L in German,
S=Square root, see DE88S in English and DG88S in German,
Q=Quadratic, see DE88Q in English and DG88Q in German,
printer F, see DE88F in English and DG88F in German,
printer O, see DE88O in English and DG88O in German,
printer T, see DE88T in English and DG88T in German.

Achromatic ISO/IEC-test chart 3, nnn0* input
Colour Workflow (CW) by the input operator no. 2
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
L88E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
L88E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L88E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E00FP.PS / TXT / PDF L88E00FP.DAT
L88E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L88E01FP.PS / TXT / PDF L88E01FP.DAT
L88E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E02FP.PS / TXT / PDF L88E02FP.DAT
L88E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L88E03FP.PS / TXT / PDF L88E03FP.DAT
L88E04NP.PS / TXT / PDF   4 lab* setcolor L88E04FP.PS / TXT / PDF L88E04FP.DAT
L88E05NP.PS / TXT / PDF  5 LAB* setcolor L88E05FP.PS / TXT / PDF L88E05FP.DAT
L88E06NP.PS / TXT / PDF  6 000n* setcmykcolor L88E06FP.PS / TXT / PDF L88E06FP.DAT
L88E07NP.PS / TXT / PDF  7 w* setgray L88E07FP.PS / TXT / PDF L88E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 2
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
L88E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E00FA.PS / TXT L88E00FA.DAT
L88E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray L88E01FA.PS / TXT L88E01FA.DAT
L88E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E02FA.PS / TXT L88E02FA.DAT
L88E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor L88E03FA.PS / TXT L88E03FA.DAT
L88E04NA.PS / TXT   4 lab* setcolor L88E04FA.PS / TXT L88E04FA.DAT
L88E05NA.PS / TXT  5 LAB* setcolor L88E05FA.PS / TXT L88E05FA.DAT
L88E06NA.PS / TXT  6 000n* setcmykcolor L88E06FA.PS / TXT L88E06FA.DAT
L88E07NA.PS / TXT  7 w* setgray L88E07FA.PS / TXT L88E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 2 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L88E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E00SP.PS / TXT / PDF L88E00SP.DAT
L88E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L88E01SP.PS / TXT / PDF L88E01SP.DAT
L88E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E02SP.PS / TXT / PDF L88E02SP.DAT
L88E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L88E03SP.PS / TXT / PDF *) L88E03SP.DAT
L88E04NP.PS / TXT / PDF   4 lab* setcolor L88E04SP.PS / TXT / PDF L88E04SP.DAT
L88E05NP.PS / TXT / PDF  5 LAB* setcolor L88E05SP.PS / TXT / PDF L88E05SP.DAT
L88E06NP.PS / TXT / PDF  6 000n* setcmykcolor L88E06SP.PS / TXT / PDF L88E06SP.DAT
L88E07NP.PS / TXT / PDF  7 w* setgray L88E07SP.PS / TXT / PDF L88E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file L88E03SP.PS with the file L88E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file L88E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L88E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E10FP.PS / TXT / PDF L88E10FP.DAT
L88E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L88E11FP.PS / TXT / PDF L88E11FP.DAT
L88E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E12FP.PS / TXT / PDF L88E12FP.DAT
L88E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L88E13FP.PS / TXT / PDF L88E13FP.DAT
L88E14NP.PS / TXT / PDF   4 lab* setcolor L88E14FP.PS / TXT / PDF L88E14FP.DAT
L88E15NP.PS / TXT / PDF  5 LAB* setcolor L88E15FP.PS / TXT / PDF L88E15FP.DAT
L88E16NP.PS / TXT / PDF  6 000n* setcmykcolor L88E16FP.PS / TXT / PDF L88E16FP.DAT
L88E17NP.PS / TXT / PDF  7 w* setgray L88E17FP.PS / TXT / PDF L88E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 2
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
L88E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E10FA.PS / TXT L88E10FA.DAT
L88E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray L88E11FA.PS / TXT L88E11FA.DAT
L88E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E12FA.PS / TXT L88E12FA.DAT
L88E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor L88E13FA.PS / TXT L88E13FA.DAT
L88E14NA.PS / TXT   4 lab* setcolor L88E14FA.PS / TXT L88E14FA.DAT
L88E15NA.PS / TXT  5 LAB* setcolor L88E15FA.PS / TXT L88E15FA.DAT
L88E16NA.PS / TXT  6 000n* setcmykcolor L88E16FA.PS / TXT L88E16FA.DAT
L88E17NA.PS / TXT  7 w* setgray L88E17FA.PS / TXT L88E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 2 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 2
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 2
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L88E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L88E10SP.PS / TXT / PDF L88E10SP.DAT
L88E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L88E11SP.PS / TXT / PDF L88E11SP.DAT
L88E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L88E12SP.PS / TXT / PDF L88E12SP.DAT
L88E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L88E13SP.PS / TXT / PDF *) L88E13SP.DAT
L88E14NP.PS / TXT / PDF   4 lab* setcolor L88E14SP.PS / TXT / PDF L88E14SP.DAT
L88E15NP.PS / TXT / PDF  5 LAB* setcolor L88E15SP.PS / TXT / PDF L88E15SP.DAT
L88E16NP.PS / TXT / PDF  6 000n* setcmykcolor L88E16SP.PS / TXT / PDF L88E16SP.DAT
L88E17NP.PS / TXT / PDF  7 w* setgray L88E17SP.PS / TXT / PDF L88E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 2 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file L88E13SP.PS with the file L88E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file L88E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder DE88, see
../DE.HTM in English or ../DG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.