181212 and 030101: A/DE87/DE87L.HTM

For this page, see DE87 in English or DG87 in German.
For the previous page, see DE86 in English or DG86 in German.
For the next page, see DE88 in English or DG88 in German.
Back to the main page of this colour series, see ../DE in English or ../DG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see DE87L in English and DG87L in German,
S=Square root, see DE87S in English and DG87S in German,
Q=Quadratic, see DE87Q in English and DG87Q in German,
printer F, see DE87F in English and DG87F in German,
printer O, see DE87O in English and DG87O in German,
printer T, see DE87T in English and DG87T in German.

Achromatic ISO/IEC-test chart 3, w* input
Colour Workflow (CW) by the input operator no. 1
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
L87E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
L87E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E00FP.PS / TXT / PDF L87E00FP.DAT
L87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L87E01FP.PS / TXT / PDF L87E01FP.DAT
L87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E02FP.PS / TXT / PDF L87E02FP.DAT
L87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L87E03FP.PS / TXT / PDF L87E03FP.DAT
L87E04NP.PS / TXT / PDF   4 lab* setcolor L87E04FP.PS / TXT / PDF L87E04FP.DAT
L87E05NP.PS / TXT / PDF  5 LAB* setcolor L87E05FP.PS / TXT / PDF L87E05FP.DAT
L87E06NP.PS / TXT / PDF  6 000n* setcmykcolor L87E06FP.PS / TXT / PDF L87E06FP.DAT
L87E07NP.PS / TXT / PDF  7 w* setgray L87E07FP.PS / TXT / PDF L87E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
L87E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E00FA.PS / TXT L87E00FA.DAT
L87E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray L87E01FA.PS / TXT L87E01FA.DAT
L87E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E02FA.PS / TXT L87E02FA.DAT
L87E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor L87E03FA.PS / TXT L87E03FA.DAT
L87E04NA.PS / TXT   4 lab* setcolor L87E04FA.PS / TXT L87E04FA.DAT
L87E05NA.PS / TXT  5 LAB* setcolor L87E05FA.PS / TXT L87E05FA.DAT
L87E06NA.PS / TXT  6 000n* setcmykcolor L87E06FA.PS / TXT L87E06FA.DAT
L87E07NA.PS / TXT  7 w* setgray L87E07FA.PS / TXT L87E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E00SP.PS / TXT / PDF L87E00SP.DAT
L87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L87E01SP.PS / TXT / PDF L87E01SP.DAT
L87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E02SP.PS / TXT / PDF L87E02SP.DAT
L87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L87E03SP.PS / TXT / PDF *) L87E03SP.DAT
L87E04NP.PS / TXT / PDF   4 lab* setcolor L87E04SP.PS / TXT / PDF L87E04SP.DAT
L87E05NP.PS / TXT / PDF  5 LAB* setcolor L87E05SP.PS / TXT / PDF L87E05SP.DAT
L87E06NP.PS / TXT / PDF  6 000n* setcmykcolor L87E06SP.PS / TXT / PDF L87E06SP.DAT
L87E07NP.PS / TXT / PDF  7 w* setgray L87E07SP.PS / TXT / PDF L87E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file L87E03SP.PS with the file L87E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file L87E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E10FP.PS / TXT / PDF L87E10FP.DAT
L87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L87E11FP.PS / TXT / PDF L87E11FP.DAT
L87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E12FP.PS / TXT / PDF L87E12FP.DAT
L87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L87E13FP.PS / TXT / PDF L87E13FP.DAT
L87E14NP.PS / TXT / PDF   4 lab* setcolor L87E14FP.PS / TXT / PDF L87E14FP.DAT
L87E15NP.PS / TXT / PDF  5 LAB* setcolor L87E15FP.PS / TXT / PDF L87E15FP.DAT
L87E16NP.PS / TXT / PDF  6 000n* setcmykcolor L87E16FP.PS / TXT / PDF L87E16FP.DAT
L87E17NP.PS / TXT / PDF  7 w* setgray L87E17FP.PS / TXT / PDF L87E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
L87E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E10FA.PS / TXT L87E10FA.DAT
L87E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray L87E11FA.PS / TXT L87E11FA.DAT
L87E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E12FA.PS / TXT L87E12FA.DAT
L87E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor L87E13FA.PS / TXT L87E13FA.DAT
L87E14NA.PS / TXT   4 lab* setcolor L87E14FA.PS / TXT L87E14FA.DAT
L87E15NA.PS / TXT  5 LAB* setcolor L87E15FA.PS / TXT L87E15FA.DAT
L87E16NA.PS / TXT  6 000n* setcmykcolor L87E16FA.PS / TXT L87E16FA.DAT
L87E17NA.PS / TXT  7 w* setgray L87E17FA.PS / TXT L87E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
L87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor L87E10SP.PS / TXT / PDF L87E10SP.DAT
L87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray L87E11SP.PS / TXT / PDF L87E11SP.DAT
L87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor L87E12SP.PS / TXT / PDF L87E12SP.DAT
L87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor L87E13SP.PS / TXT / PDF *) L87E13SP.DAT
L87E14NP.PS / TXT / PDF   4 lab* setcolor L87E14SP.PS / TXT / PDF L87E14SP.DAT
L87E15NP.PS / TXT / PDF  5 LAB* setcolor L87E15SP.PS / TXT / PDF L87E15SP.DAT
L87E16NP.PS / TXT / PDF  6 000n* setcmykcolor L87E16SP.PS / TXT / PDF L87E16SP.DAT
L87E17NP.PS / TXT / PDF  7 w* setgray L87E17SP.PS / TXT / PDF L87E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file L87E13SP.PS with the file L87E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file L87E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder DE87, see
../DE.HTM in English or ../DG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.